Thrombus Aspiration Device Cylone™ Aspiration Catheter
● Product Characteristics
End to End Nitinol Coil
·Inner coil layer enhances radio force under negative pressure and provides superior kink resistance .
·Capable of delivering a pressure of -99.0 KPa for aspiration
Braid
·Braid provides torsion control and enhances tensile strength of the device.
Large Inner Lumen Diameter
• Reinforced distal end with coil construction resists the tip collapse during aspiration.
• Capable of delivering a pressure of -99.0 KPa for aspiration theraphy.
Hydrophilic coating at the distal end of catheter body
·To reduce friction during navigation.
Multi transition zones optimize force transmission and provide extra support throughout aortic arch
• Lower bending rigidity at distal segment-Softer distal segment allows CyloneTM to overcome the most tortuous anatomies.
• Greater bending rigidity at proximal segment provides excellent pushability and push/pull control.
● Product Use
To remove the thrombus blocked in the large intracranial artery within 8 hours after the onset of ischemic stroke to restore blood flow, including internal carotid artery, M1 and M2 segments of middle cerebral artery, A1 and A2 segments of anterior cerebral artery.Moreover, the Cylone™ Aspiration Catheter can be used to facilitate introduction of diagnostic or therapeutic agents.
● Product Parameter
|
Product Code |
Catheter Size(French) |
OD(in/mm) |
ID(in/mm) |
Working length(cm) |
|
TGC070-06-115 |
6 |
0.0825/2.10 |
0.070/1.80 |
115 |
|
TGC070-06-125 |
6 |
0.0825/2.10 |
0.070/1.80 |
125 |
|
TGC070-06-130 |
6 |
0.0825/2.10 |
0.070/1.80 |
130 |
|
TGC070-06-135 |
6 |
0.0825/2.10 |
0.070/1.80 |
135 |
|
TGC055-05-115 |
5 |
0.068/1.70 |
0.055/1.40 |
115 |
|
TGC055-05-125 |
5 |
0.068/1.70 |
0.055/1.40 |
125 |
|
TGC055-05-130 |
5 |
0.068/1.70 |
0.055/1.40 |
130 |
|
TGC055-05-135 |
5 |
0.068/1.70 |
0.055/1.40 |
135 |
● Product Superiority
·Excellent navigability, easy navigation to the M1 and M2 segment.
·Great push-ability, easy enter the tortuous vessels.Maintain lumen integrity during navigation and aspiration.
·The catheter body is coated with hydrophilic coating to reduce the push resistance and enhance the position.
